Deep Trekker DTG2 Turbo Worker - In Stock; Please Call for Pricing | Deep Trekker

Deep Trekker DTG2 Turbo Worker - In Stock; Please Call for Pricing

$0.00 USD

Get more work done. Retrieve objects or specimens with the 2-function grabber arm and go deeper with 100 M of tether and double the speed. The added intelligence of auto-heading and auto-depth make precise inspections and retrievals easier.

All DTG2 Worker Models are now equipped with the Turbo thruster configuration, allowing for 2.5 times forward speed.

System Contents:

  • DTG2 ROV
  • 100 m tether 
  • Heavy duty tether reel with bearings and electrical slip ring for easy tether management
  • Integrated Super Bright Screen Controller
  • Robust Carrying Case
  • Intelligent sensor package complete with auto depth and auto heading
  • 2 Function Grabber Arm
  • Smart chargers
  • Buoyancy weight set
  • Operator manual
  • 1 Year Warranty
The DTG2 Worker is designed for the ROV operator who needs to capture or manipulate objects below the surface as well as have the control of heading and depth with the sensors package. It comes complete with 100 Meters (328 ft) of tether, integrated screen controller, robust tether reel, 2 function grabber, sensor package and carrying case.
The DTG2 Worker is our most popular model, allowing treasure hunters, search and rescue crews, or someone who lost their sunglasses to easily retrieve objects underwater.
The sensor package allows the ROV pilot to set auto depth and auto heading, as well as to see water temperature, compass heading, remaining battery, ROV pitch and roll, depth, and camera angle.
Sensors included:
  • Heading (degrees)
  • Depth (meters)
  • Water Temperature (degrees C)
  • Pitch (degrees)
  • Roll (degrees)
  • Camera Angle (degrees)
  • Turns Counter
  • ROV Hour Counter (hours)
  • Battery Level Controller (%)
  • Battery Level ROV (%)
  • Added ROV Intelligence
  • Auto-Heading
  • Auto-Depth
  • Display Text overlay to live video screen
  • Depth Rating75m (246 ft)
  • Operating Temperature -5 C to 40 C (23 F -104 F)
  • Warranty 1 year - parts and labour
The innovative design of DTG2 is like no other ROV on the market. Powered by on-board rechargeable batteries, this 19.2V system offers many advantages over the typical top side powered ROVs. The on-board batteries reduces tether diameter and eliminates power loses through long power feeds. A smart charger simply plugs into the back of the ROV when back on shore and indoors. Onboard sensors monitor the motor's status and will immediately cut power if there is a fault. Additional sensors track the battery and warn the operator of low levels. A low battery is not of any concern as the ROV can simply be pulled out of the water with the tether. Normal battery life is 6 to 8 hours of run time with a recharge time of 3 hours.
The DTG2 ROV is constructed to last. The cast aluminum body encases a 360 degree center window allowing for an unprecedented field of view. The patented vertical pitch system allows for unique and exceptional maneuverability. Well protected 63mm diameter propellers prevent debris from binding the output shaft. High powered rare earth magnetic couplers means there are no dynamic seals on this system, for maximum leak protection. A 700HD line colour camera rotates from the center of the ROV to take advantage of the center window and gives the operator a 270 degree vertical field of view. The camera is tracked by an LED floodlight. This feature allows the operator to look in any direction whether it be straight up at the hull of a boat or straight down at the seabed while driving forward.
The DTG2 is sized for good stability in the water, but small enough to transport by hand to difficult locations. At 18.8 lb. you may lower it into the water by the tether over the side of the boat or even from a very high vantage point, such as a bridge. The nominal buoyancy of the ROV is set to neutral. It can be adjusted with an included set of stainless steel weights to fine tune the unit according to your preference and water conditions.
Commanding the DTG2 is simple using the lightweight and very portable controller. This familiar style of controller will ease the learning curve normally required to pilot ROVs. The custom designed control pad shaped to resemble the ergonomically proven gaming pad.  Together, these features make the DTG2 WORKER perfect for those requiring precision for inspections and the ability to manipulate objects underwater.