DT340S Pipe Crawler Package

$24,957 USD

Pricing shown in USD

The DT340 S package includes everything you need as a professional pipe inspector. The system includes a pan, tilt and zoom camera to easily view your entire pipe system as well as a tether length counter to know where defects are found within the pipe system. The simple to use handheld controller with integrated viewing screen includes everything you need to operate your DT340 crawler.

Package Contents:

  • DT340 Pipe Crawler with PTZ Camera Head
  • 150m Tether on Reel with Tether Length Counter
  • Handheld Controller
  • Carrying Cases (2)

SKU: DT340 S Category:


Share this
Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn

The DT340 S Package is ideal for professional pipe inspections. Built on the proven design of Deep Trekker remotely operated vehicles, the DT340 Pipe Crawler is complete with on-board batteries lasting up to 8 hours on a 1.5 hour charge. Short charge-ups while on a break, extend this life even longer. Using a hand-held controller with an integrated super-bright viewing screen, inspectors can easily maneuver throughout their pipe system.

The benefit of batteries are numerous, not only can the entire system be deployed by one or two people, no additional trucks or equipment are required. The entire system fits into two carrying cases, that can be easily stored and deployed from a small vehicle or ATV.

The Standard system comes complete with 4 wheels designed to fit in an 8 inch pipe. Optional wheel sizes and tracks are available to properly position the camera head in the center of the pipe. Optional wheels and tracks can be added or removed in-field. The options bolt onto the outside of the standard wheels using four screws.

Pan, Tilt and Zoom (PTZ) Camera Head Specifications: 

Imager: Color 1/4” CCD
Resolution: 530 TVL, 1.0 lux
Zoom: 10X Optical, 12X digital
Features: Auto/manual iris, auto/manual focus
Tilt Range: 280 degrees
Pan Range: Infinite (continuous)

Click “Additional Information” above for all specifications. 

The DT340 S Pipe Crawler is submersible in up to 50m (164 ft) of water. Inspect submerged storm, sanitary, or underwater pipelines with ease.

Don’t need all of these bells and whistles?
Our DT340L Package has a Static Camera Head and No Tether Length Counter

Looking for a more advanced package?
Our DT340X Package Includes everything from the ‘S’ package, plus an elevating arm, 400m (1312ft) of tether, and 12″ wheel set

Share this
Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn

Additional information


Length: 710 mm (27.95”)
Width: 141 mm (5.55“)
Height: 151 mm (5.96”)

Weight (in air)

15.5 kg (34.17 LB)


Stainless steel

Flood Lights

Dimmable, Shadowless LED Flood

Minimum Pipe Size

200 mm (8”)

Depth Rating

50 M (164 FT)


12 m / min

Operating Temperature

-5C to 40C (23F – 104F)

Electrical System

19.2 VDC (Lithium batteries)
Up to 8 hours Run Time
1.5 hrs Recharge

Included Sensors

Incline, Roll, Leak, Internal Temperature, Camera pan/tilt


5 mm (0.19”)
Polyurethane outer jacket with embedded Light weight synthetic fibers
Optional Lengths up to 400 m (1,312 ft)

Tether Strength

Minimum Breaking Strength: 453 kg (1000 lb)

Tether Reel

Industrial tough; IP68
Standalone hall effect tether counter
Manual coil
Free-wheel uncoil with guide

Drive System

Power: Planetary gear motor (2 pieces)
Wheel Control: Steerable, active freewheel, Infinitely variable (forward & reverse)
Gear Train: High strength oversized gears
Final Drives: Magnetically coupled