+56652258441Configure Now
Articoli nel carrello0
0Articoli nel carrello
Inizia a creare il tuo pacchettoAcquista ora
- HomeShopUtility Crawler | All Add-onsVacuum Heads | VAC
Vacuum Heads | VAC
Want to clean sediment and sludge out of the bottom of water storage tanks without calling divers or draining the tank? Connect a vacuum head to your VAC Crawler with a hose and pump to clean tanks remotely.14” to 36” (300 to 900mm), single, dual or quad 2” intakes.
Errore nell'aggiunta dell'articolo al preventivo
Aggiunto al preventivo
1.5" to 2" hose compatible
14” to 36” (300 to 900mm) vacuum heads
Angle 20-40 Degrees
Raise 2-4”
Tank vacuum kit for cleaning sediment from the bottoms of water storage tanks
The vacuum head connects to the VAC arch kit, holding the vacuum head out the front of the crawler. The main body camera provides a high-definition view on your controller that monitors this vacuum head's cleaning progress. Connect a flexible 1.5” to 2" (38 to 50mm) hose to the intakes and the other end of the hose to a water pump. The actuators on the arch kit enable the vacuum head to rotate 20 degrees to get into corners or near obstructions like valves. The actuator also can raise and lower the vacuum head kit 20 degrees, or up to 2" (50mm) off the bottom of the tank. The 18" dual intake is the most popular of the three options, as it balances being a size that fits in most areas and manholes of tanks while getting good coverage of the tank.
Tank vacuum kit for cleaning sediment from the bottoms of water storage tanks
The vacuum head connects to the VAC arch kit, holding the vacuum head out the front of the crawler. The main body camera provides a high-definition view on your controller that monitors this vacuum head's cleaning progress. Connect a flexible 1.5” to 2" (38 to 50mm) hose to the intakes and the other end of the hose to a water pump. The actuators on the arch kit enable the vacuum head to rotate 20 degrees to get into corners or near obstructions like valves. The actuator also can raise and lower the vacuum head kit 20 degrees, or up to 2" (50mm) off the bottom of the tank. The 18" dual intake is the most popular of the three options, as it balances being a size that fits in most areas and manholes of tanks while getting good coverage of the tank.
Related items
Utilizziamo i cookie per raccogliere informazioni sulle tue interazioni con il nostro sito web allo scopo di migliorare e personalizzare la tua esperienza. Per ulteriori informazioni sui cookie che utilizziamo, consulta la nostra Informativa sulla.privacy.